AVANT GARD BLACK

Top quality strut mounts in rectangular, 2-on
and 4-on mount styles.

• Top quality rigid board (650 gsm, 900 micron), not inferior flexible or light-weight.
• Back is made of the same board as the front, not cheap pulp board.
• A superior quality solid black mount.
• Features a single blind embossed line around the aperture.
• Two way strut allows standing portrait or landscape.
• Manufactured from fully recycled board.
• Available the sizes: 6 x 4 | 7 x 5 | 8 x 6 | 9 x 6 | 10 x 7 | 10 x 8 | 12 x 8 | 12 x 10
• Available as a 2-ON Mount in sizes 5 x 3.5 | 5 x 4
• Available as a 4-ON Mount in sizes 3.5 x 2.5
• Matching Panoramic and Dual strut mounts avalable - see below.
• Single mounts can be purchased.
• Available with resealable polypropylene bags (see ABOUT BAGS tab for details).

Click tabs to show details:

IMPORTANT
All strut mount sizes given are in inches.

The strut mount size refers to the photograph size - the aperture is slightly smaller to allow for positioning.

For example: an 8x6 inch mount takes an 8x6 inch print, the strut mount's overall size is 10x8 inches.

All the photo strut mounts in this section have a two way strut to allow upright or view standing unless oterwise stated.

Presentation is everything so remember to purchase bags with your Photo Strut Mounts, they are the most cost effective way of presenting your photographs.

There are three type of bags:
      - the traditional clear face bags with a white paper back - these can be purchased separately
      - and the superior resealable polypropylene clear bags - these are available as an option when purchasing strut mounts or can be purchased separately
      - and the superior permanent seal polypropylene clear bags - these are available in a limited number of sizes and can be purchased separately

To see the full range of photograph bags - click here.

If you will be ordering Clear Face or Resealable Polypropylene Bags separately, please note that you need to order a bag that takes the overall size of the strut mount - we will always check the bag fits the mounts you have ordered and contact you if we think you may need a different size

Images of polypropylene bags

PRINTING AND PERSONALISING

We can provide a foil block printing service to personalise your Strut Mounts and Slip-in Folders with your Studio Name - Logo or Event.

Personalisation is FREE when you order over £200.00 (inc VAT) of the strut mount or folder to be personalised.

For orders under £200.00 (inc VAT) the basic charge for setting up and printing is £25.00 (inc VAT) but this depends on how much information you want printing - we will let you know if the cost is higher. Special designs and logos will require a block to be made - this will be added to the cost of printing.

Foils are available in Silver and Gold as well as Green, Red, Black and White.

To order personisation for your strut mounts or folders, click here to go to our order page.

To find out more about our Trial Packs of strut mounts and photo folders, click on the link:

Trial Packs

Please note: Strut Mounts and Folders are the only exception to our 30 day no quibble guarantee - we only accept returns or an exchange within 7 days of receipt. Please read our Terms and Conditions.