Sheet Size: 44.1 x 32.1 inch (1120 x 815 mm)
Thickness: 1400 micron
Note, the following colours are discontinued:
7620 Chaste White
7651 Rain Shimmer
BlackCore mountboard is only available for delivery in 10 or more sheets. These can be the same or assorted colours. Single sheets can be purchased but require collection from our showroom.
Please note that the mountboard’s blackcore will change the surface colour to some extent – in comparison to whitecore.
Please note the colours shown here may be slightly different due to the limitation of colour rendition on device screens – if you require a mountboard swatch for an exact colour match please contact and we will send one out to you.
IMPORTANT transit damage to mountboard
We endeavour to pack mount board in a way that protects it during delivery to you. However, on occasions, a small amount of damage occurs to the board edges or corners. To prevent the need to replace damaged mountboard and the inconvenience it causes to you, we have reduced the price so it is equivalent to a board size that is 30mm smaller all the way around.
IMPORTANT delivery limitations
Mountboard is only available for delivery in 10 or more sheets. These can be the same or assorted colours. Single sheets can be purchased but require collection from our showroom.
Due to the size of mountboard delivery is only available to mainland U.K. addresses on our Premium 1-2 day delivery service.
Mountboard delivery is not available to postcodes IV, HS, KA27-28, KW, PA20-49, PA60-78, PH17- 26, PH30-44, PH49-50, ZE; BT, IM, and TR21-25.
Larson Juhl (Arqadia) BlackCore is made from chemically-treated pulp using high pH sizing and lignin-free.
The water-soluble extracts are minimal i.e. chloride below 0.05%, sulphate below 0.25%. For extra defence it contains a buffer of calcium carbonate to guard against contamination by air-borne acid for the life of the board.
The core is neutral is of highly-refined wood pulp, sized with an alkaline (neutral) material. Buffered with calcium carbonate.
The adhesive is aqueous PVA with neutral pH – and is plasticiser-free.
Accelerated ageing test TAPPI T.509 SU68, 0 years – pH8.7 | 25 years -pH8.4 | 50 years -pH7.2 | 100 years -pH7.2.
BlackCore meets the FATG Standard level.